Learning The Secrets About Installations

Business Products & Services

Basic Outdoor Wood Furnace Maintenance Tips It’s undeniable – an outdoor wood furnace is costly. But don’t let that intimidate you. It’s a long term investment that could last even longer with the right care. The following are essential tips for outdoor wood furnace maintenance: Periodic Cleaning
News For This Month: Installations
Depending on the amount of wood you are burning, the unit normally needs to be cleaned out once a month at least, sometimes more frequently. Some units have a built in auger system that makes use of an auger to eliminate the ashes. But auger usually just removes the ashes around it and not those that are stuck to the sides.
News For This Month: Installations
During clean out time, the fire must be allowed to reduce to a few hot coals. Using a shovel, move all the hot coals to one side of the firebox. Scoop the ashes out and into a metal garbage bin. Once one side of the firebox has been cleaned, push the hot coals towards the opposite side of the firebox, then remove all ashes that have remained. When done, you can have an ash-free firebox with some remaining hot coals you can use to easily restart your fire. The metal garbage container will cool the ashes safely, and in a matter of days, you can spread in other places, such as your garden. Water Treatment The water inside the unit has to be treated so that corrosion can be prevented. Untreated water considerably reduces your unit’s durability. There are various providers offer water treatment services today. For a lot of people, tinted water treatment is preferable. The tinted treatment is added until the water in the unit develops a similar tint. As soon as this happens, the process is done. Just keep an eye on water’s color, and, if necessary, add more treatment. There are other treatments that work too, such as one where a test kit is needed to check if the water has been treated properly. It is all a question of preference, so the decision on which treatment to use, is entirely in your hands. Whatever method you choose, just be sure the water is treated well. It’s also important to maintain the right water volume in the unit to prevent damage. The furnace should come with a gauge that makes it easy to checking the water level. Prevention of Corrosion Units mostly have an anode rod accessible above the furnace. Because it is the target of rust and corrosion, the water jacket is spared. Anode rods are typically used in water heaters and deliver the same purpose – boost the unit’s durability. The anode rod must be inspected at least once yearly, ensuring it has remained in good shape. If not, replacement is easy.